Liquid Levers Innovations are experts in the field of brake fluid test technology. Liquid Levers Innovations design and manufacture professional diagnostic equipment for the automotive industry. Small Brake Bleeder, Compact Brake Bleeder, Brake Bleeder Accessories, Brake Fluid Safety Meter, Track Rod Socket, Automotive Strut Compressor, CV Joint Circlip Remover, Hydravac Suspension Pump Click to return to homepage
Click to return to homepage Click to return to homepage
  Products PAGE :   1     2
 
  Click for more info Click for more info   Click for more info Click for more info  
Click for more info Click for more info Click for more info Click for more info

   
  • High enough pumping capacity to allow all nipples to be bled simultaneously.
  • Variable bleed pressure to cope with all modern vehicle requirements.
  • Small size and low weight make the unit portable and versatile.
  • Engineered in welded steel to survive heavy use in the garage environment.
  • Available to order for 24 Volt operation, also for use with light hydraulic fluids.
  • Standard pressure capacity is 0.5 to 2 Bar, but supplied to order for either 3 or 4 Bar.
  • Supplied with "Universal" European screw cap, specific and "custom" caps also available.
  • Range of Bleed Caps covers virtually any vehicle on the road, including Far Eastern and Commercial vehicles.
  • Bayonet and screw types available.
  • Plastic coated steel cable with tensioning device holds the cap firmly in place.
  • Tapered caps - each cap suits a selection of reservoir openings.

 
  Click for more info Click for more info   Click for more info Click for more info  
Click for more info Click for more info Click for more info Click for more info

   
  • The only fully MG/Rover approved system available worldwide.
  • Patented vacuum facility allows easy evacuation of the system when required.
  • Ensures completely "air-free" suspension.
  • Precision engineering and welded steel construction for the garage environment.
  • Schrader low-loss connector fitted as standard.
  • Greatly reduces labout costs.
  • Supplied with height setting chart for all known relevant vehicles.
  • Saves time and money - A one man job, saves 20 mins per CV joint.
  • Works first time every time.
  • Made from hardened stainless steel.
  • Cost effective - Could pay for itself on its first job.
  • Locks into position - Leaving hands free to replace CV joint quickly and easily.
       
     
       
Click to goto top Click to return to homepage Click to contact us
HOME | LATEST NEWS | ABOUT US | PRODUCTS | BUY ONLINE | CONTACT US
FURTHER INFORMATION | WHERE TO BUY | LOCATION | SITEMAP | LEGAL
© Liquid Levers Innovations. All rights reserved. Website Design by